External Sound Pocket Usb 7.1 Ch 3d Driver

The driver is named: usbaudio2.sys and the associated inf file is usbaudio2.inf. The driver will identify in device manager as 'USB Audio Class 2 Device'. This name will be overwritten with a USB Product string, if it is available. The driver is automatically enabled when a compatible device is attached to the system. In order to manually update your driver, follow the steps below (the next steps): 1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software. Choose to select the location of the new driver.

-->

This 8-Channel 3D USB 2.0 External 7.1 Surround Sound Box with Digital Output offers an array of features for the best surround sound experience! It supports 48/44.1 KHz sampling rate for both playback and recording, SCMS compliant (Serial Copy Management System), supports USB remote wake up and stereo MIC support. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings. TOOGOO(R) 7.1 Channel External USB Audio Sound Card Adapter.Virtual 7.1 Usb 3d Sound Card Adapter, Wholesale Various High Quality Virtual 7.1 Usb 3d Sound Card Adapter Products from Global Virtual 7.1 Usb 3d Sound Card Adapter.Usb 7.1 ch 3d external sound pocket driver. USB2.0 FULL SPEED AUDIO. CM6206 is a highly integrated single chip USB audio solution. All essential analog modules are embedded in CM6206, including 7.1CH DAC and earphone buffer, 2CH ADC, microphone gain, PLL, regulator, and USB transceiver. It is very suitable for high end USB external audio box, USB multi channel Headset or USB multi.

Symptoms

Consider the following scenario:

You connect a Universal Serial Bus (USB) audio device, such as an audio adapter or USB digital-to-analog converter (DAC), to a Windows 10 Version 1703-based computer for the first time.
The operating system detects the device and loads the standard USB audio 2.0 driver (usbaudio2.sys).
Windows then downloads the device-specific driver from Windows Update.
The downloaded device driver replaces the usbaudio2.sys driver.

In this scenario, the device cannot be used, and the computer does not have sound. The speaker icon on the task bar is marked with an X mark. When you select the icon, you receive the following message:

Audio services not responding. Both the Windows Audio and the Windows Audio End Point Builder services must be running for audio to work correctly.

Cause

This 'audio not playing' problem occurs because the default USB audio 2.0 driver (usbaudio2.sys) uses the WaveRT port for operation but the device-specific driver does not. However, both drivers use the 'wave' reference string when the device interface is registered.When the device-specific driver replaces the default driver, the device interface that is created by usbaudio2.sys is still used because the reference strings overlap. Therefore, the operating system assumes that the new driver also supports the WaveRT port. Because the new driver does not support the WaveRT port, the system cannot access the driver.

Resolution

To fix this problem, use one of the following methods.

Method 1

Uninstall the device. To do this, follow these steps:

Open Device Manager.
Select and hold (or double-click) the name of the device, and then select Uninstall.

Note:In step 2, don't select the Delete the driver software for this device check box.